Absen A1025: 10 mm Pitch Outdoor LED Display Panel

The Absen A1025 is an outdoor LED display panel with a 10 mm pixel pitch from Absen's A25 Series, the low-carbon, energy-saving range for outdoor advertising that uses less than 1 kWh per square metre per day.

A 10 mm pitch is a large-format choice: the image is built for viewers who are tens of metres away, such as billboards, mall facades, transit stations and stadiums, where a large screen area matters more than fine detail.

Corporate AV supplies, installs and supports the Absen A1025 across India. Request a quote for supply, installation and commissioning.

Key features

• 10,000 nits, IP66/IP66, -30 to +50 °C, CE, FCC, CCC, ETL
• Energy use below 1 kWh per m² per day, with over 50% saving against standard solutions (Absen laboratory data)
• Pixel pitch 10 mm (A1025)
• 1280 x 960 x 82 mm cabinet in the A25 range
• 10-second module swap and a modular power box that lets cabinet frames be reused
• Curved-corner support for smooth shapes and naked-eye 3D video
• Aimed at billboard, transit, sport, street furniture and digital sign installations

Low-carbon outdoor display from the A25 Series

Absen designed the A25 Series to cut running cost and carbon: less than 1 kWh per square metre per day, and more than 50% energy saving compared with standard solutions, based on Absen laboratory measurements. Absen also states the series is built to last up to 10 years and passed an 11-day continuous high-pressure stress test.

Fast to service and flexible in shape

Modules swap in about 10 seconds, and the power box is modular so the cabinet frames can be reused. Curved corners are supported for smooth shapes without jumps, including naked-eye 3D video content on corner screens. Absen shows A25 Series installations as shopping mall media facades, transit station signs, sports venue screens and street furniture.

About the model name

The A1025 is the 10 mm pitch member of the A25 Series. The supplier listing describes it as an indoor screen; Absen presents the A25 Series as an outdoor advertising display, and Corporate AV specifies it for outdoor use.

How to choose the right size and pixel pitch

Pixel pitch is the distance between neighbouring LED pixels: a smaller pitch gives a sharper image that can be viewed from closer. As a common industry rule of thumb, the minimum comfortable viewing distance in metres is roughly equal to the pixel pitch in millimetres, so a 2.5 mm pitch suits viewers sitting about 2.5 m or further away. At 10 mm, a viewer should be roughly 10 m or more from the screen, so this pitch suits large outdoor audiences rather than close viewing.

Corporate AV checks pitch, wall size and aspect ratio against your seating, content and budget during the site survey, so the A1025 is specified for how the room is actually used.

What Corporate AV delivers in India

• A site survey and viewing-distance study before any order
• Structure, power and cooling coordination with your civil and electrical teams
• Controllers, processors and signal chain matched to your sources and control system
• Installation, calibration and commissioning by our engineers
• Operator training and after-sales support across India

What to send for a quote

Share the wall location (indoor or outdoor), available width and height, typical viewing distance, content sources, mounting surface and target date. A Corporate AV consultant will come back with a proposal for the A1025 covering supply, installation and commissioning.